Konica Minolta FK-502 - Manual (Page 133)

C650 6-15
Useful transmission functions 6
For setting the Fold erase values in North American models (Inch) with fraction display, touch [ ],
change the numerator and denominator and the touch [-] or [+].
In case of setting the Center Erase values for numeric display in North American models (Inch),
press keypad or [-] and [+]. "Input Error" is displayed when a numerical value outside the range is
input. When "Input Error" is displayed or when there is any mistake while entering the deletion width,
press [C] (clear) key and enter the value again.
For details on switching between decimal and fraction values, refer to "User’s Guide (Copy
Operations)".
– For details on [Frame Erase], refer to "Sending the fax after removing the black shadow (Frame
Erase)" on page 6-10.
6
Touch [OK].
Returns to Book Scan screen.
7
Touch [Close].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen
9
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
10
Specify the destination.
– Advances to Procedure 11 when specify [Book Spread] or [Separation] are specified.
– Advances to Procedure 12 when specify [Front Cover] or [Front + Back Covers] are specified.
– For details on destination, refer to "Specifying only one destination" on page 2-13 and "Specifying
multiple destinations (Sequential broadcast transmission or broadcast transmission)" on page 2-22.
11
Press [Start] key.
The original is scanned.
12
Scan the entire original and touch [Finish].