8 specifying relay box settings, Registering relay user box – Konica Minolta FK-502 User Manual
Page 217
C650
9-29
Registering/Specifying Settings
9
9.8
Specifying Relay box settings
Relay broadcast function that uses F-code can be used in this machine. The [Relay RX] of the Utility mode
should be set to [ON] and the Relay User Box should be registered for using this machine as intermediate
relay station. Maximum 5 Relay User Box can be registered.
!
Detail
Notify the set details to the originating station that sends the original.
The Terminating Station information should be registered as a group destination in advance to use the
relay distribution function.
Registering Relay User Box
!
Detail
Relay User Box can be registered from "PageScope Web Connection". For details on the using
PageScope Web Connection, refer to the User’s Guide [PageScope Web Connection Operations].
1
Press [Utility/Counter] key to display the Utility mode screen.
2
Touch [One Touch/User Box Registration].
–
In the Utility mode, the number displayed on button can be entered and selected on the keypad. For
[One-Touch/User Box Registration], enter [1] on the keypad.
–
[One-Touch/User Box Registration] cannot be registered or changed when [Registering and
Changing Address] is set to [Restrict] in the Utility mode. Contact the administrator to register or
change the [One-Touch/User Box Registration].
3
Touch [Create User Box].