Auto printing, Auto printing -5 – Konica Minolta FK-502 User Manual
Page 312
C650
11-5
Reports and Lists
11
Result:
Note: One of the following is described.
2
Note
Some items may not be described depending on the optional settings.
Auto Printing
Interval at which the communication management report is printed can be set in [Report Setting] of the Utility
mode.
!
Detail
For [Report Settings], refer to "Specifying the printing methods for report (Report Setting)" on
page 10-69.
OK:
Described when communication is terminated normally.
S-OK:
Described when communication has stopped.
PW-OFF:
Described when operation power switch was turned OFF during communication.
TEL:
Described when there is telephone call.
NG:
Described when there is communication error.
Cont:
Described when there is a transmission error and that there is transition to resend
wait mode (Error page redial).
No Ans:
Described when there is no response from the recipient.
Busy:
Described when communication is not possible as the recipient’s line is busy.
M-Full:
Described when it is not possible to receive a fax when the fax file memory becomes
full during reception.
L1
Main line
TMR
Timer communication
ORG
Original size specification
MIX
Mixed Original transmission
CSRC
Telediagnosis
PC
PC-FAX
SP
Special Original
RTX
Resending
MBX
Confidential
L2
Sub-line
POL
Polling
FME
Frame Erase transmission
CALL
Manual communication
FWD
Forward
BND
Binding Position
FCODE
F-code specifications
RLY
Relay
BUL
Bulletin board