Konica Minolta FK-502 - Manual (Page 271)

C650 10-51
Utility mode 10
10.19 Specifying memory reception settings (Memory RX Settings)
Whether or not to use the Memory RX function is set. When these settings are valid, password (within 8 digits)
used at the time of printing is set.
Memory RX is the function of printing the received original after storing in the memory for some time and then
printing after the receiving such instruction and not printing it immediately.
Memory RX Settings: (Set password in 8 digits)/No*
* is a default value at the time of procurement.
!
Detail
When the [Memory RX Settings] is [ON], [PC-FAX RX Setting], [TSI User Box Setting] and [Forward TX
Setting] cannot be used.
Refer to "Handling originals received by memory" on page 7-4 for the printing method etc. of the
Memory RX original.
Specifying the Memory RX Settings
1
Display the Administrator Settings screen as described in "Displaying Administrator Settings screen"
on page 10-3.
2
Touch [Fax Settings].
– Some items may not be displayed according to setting options.
– In the Utility mode, the number displayed on button can be entered and selected on the keypad. For
[Fax settings], enter [8] on the keypad.
3
Touch [Function Settings].