Konica Minolta FK-502 - Manual (Page 228)

C650 10-8
Utility mode 10
Administrator Settings > Fax Settings > Function Settings > Function ON/OFF Setting
ON/OFF settings of the function for transmission or reception are specified. (page 10-48)
Administrator Settings > Fax Settings > Function Settings > Memory RX Settings
Whether or not to use the Memory RX function is set. (page 10-51)
Administrator Settings > Fax Settings > Function Settings > Closed Network RX
Whether or not to use the closed network reception function is set. (page 10-53)
Item Description Values that can be set
Function
ON/OFF Set-
ting F-Code TX Set whether or not to use the F-code
transmission function.
For details on F-code transmission, refer
to page 6-46. ON*/OFF
Relay RX At relay distribution station, original re-
ceived from Originating station is broad-
cast to relay distribution destination.
The relay box should be registered in or-
der to use the relay distribution function. ON*/OFF
Relay Print-
ing The original received from Originating
station is printed. ON/OFF*
Destination
Check Dis-
play Func-
tion Whether or not to display the list of
specified destinations at the time of
sending the fax is set. ON/OFF*
Confirm Address (TX) Select whether the screen for entering
the destination appears again for confir-
mation when the fax recipient is speci-
fied manually. Requiring that the
destination be entered twice reduces
misdirected faxes. ON/OFF*
Confirm Address (Register) Select whether the screen for entering
the destination appears again for confir-
mation when a destination is being reg-
istered. Requiring that the destination
be entered twice reduces the possibility
of registering destinations incorrectly. ON/OFF*
Item Description Values that can be set
Memory RX Settings Whether or not to use the Memory RX func-
tion is set.
When these settings are valid, set a password
(within 8 digits) to be used at the time of print-
ing.
Memory RX is the function of printing the re-
ceived original after storing in the memory for
some time and then printing after the receiv-
ing such instruction and not printing it imme-
diately. Set password in 8 digits/No*
Item Description Values that can be set
Closed Network RX Whether or not to use the closed network re-
ception function is set. When these settings
are valid, set the password (4 digits) to be
used in closed network reception. Closed
network reception is a function that accepts
the communication only from the caller ma-
chine that matches the password. Set password in 4 digits/No*