Konica Minolta FK-502 - Manual (Page 289)

C650 10-69
Utility mode 10
10.26 Specifying the printing methods for report (Report Setting)
The printing methods of report are set.
Activity Report: ON*/OFF
If "ON" is selected, settings can be specified for the following.
Output Setting: Daily/Every 100 comm.*/100/daily
If "Daily" or "100/daily" is selected, settings can be specified for the following.
Output Time Settings: 00:00 to 23:59 (9:00*)
- Select whether or not to print the Activity Report, and when to print it.
If "Daily" is selected, the report is printed every day at a fixed time.
If "100/daily" is selected, a report is printed that contains information about the latest 100
communications that were completed since the last report was printed. In addition, the report is printed
every day at a fixed time.
TX Result Report: ON/If TX fails*/OFF
- Whether to print the TX Result Report or not is set and when the report is to be printed is set.
Sequential TX Report: ON*/OFF
- Whether sequential TX Report is printed or not is set.
Timer Reservation TX Report: ON*/OFF
- Whether the Timer Reservation TX report is printed or not is set.
Confidential RX Report: ON*/OFF
- Whether Confidential Reception Report is printed or not is set.
Bulletin TX Report: ON*/OFF
- Whether Bulletin TX Report is printed or not is set.
Relay TX Result Report: ON*/OFF
- Whether Relay TX Result Report is printed or not is set.
Relay Request Report: ON*/OFF
- Whether Relay Request Report is printed or not is set.
PC-FAX TX Error Report: ON/OFF*
- Whether PC-FAX sending error report is printed or not is set.
Broadcast Result Report: All Destinations*/Each Destination
- The printing methods for Broadcast Result Report are set.
- When [Each Destination] is selected, Broadcast Report is output only when fax cannot be sent even
after redialing. Report is not output when transmission exits normally.
TX Result Report Check *1 : ON/OFF*
- Whether or not to display the transmission report selection screen is set. When set to [ON], it is
displayed every time there is a transmission.
-
*1
When [ON] is set in [TX Result Report Check], the transmission result report is printed when [Yes] is
touched on the screen displayed during fax transmission. It is not printed if [No] is touched.
* is a default value at the time of procurement.
Specifying Report Settings
1
Display the Administrator Settings screen as described in "Displaying Administrator Settings screen"
on page 10-3.