Konica Minolta FK-502 - Manual (Page 21)

C650 x-20
Contents
Sending faxes by command from the recipient
An original loaded or stored on the machine can be sent when a command is made by the recipient.
For details, refer to page 8-6.
Releasing ECM mode
This function allows you to release ECM mode and send faxes to reduce transmission time.
For details, refer to page 6-33.
Specifying an original for polling
An original that you want for others to view can be stored in the bulletin board box and sent by polling. In
addition, originals can be received from external bulletin board boxes via polling.
For details, refer to page 8-8.
Releasing Super G3 Mode
Faxes can be sent after releasing Super G3 Mode (V. 34) in situations where Super G3 Mode (V. 34) cannot
be used due to restrictions caused by private branch exchanges (PBX) etc.
For details, refer to page 6-35.
Specifying a relay destination
Once an original has been sent to a relay station, broadcast to recipients from the relay station is possible.
For details, refer to page 6-48.
Receiver Sender
Viewing
Registering
Bulletin board
Polling
Originating station
Toll Call
Terminating station
Relay station
Local Call
Terminating station