Konica Minolta FK-502 - Manual (Page 101)

C650 3-3
Reception 3
3.2 Auto reception (Fax only mode)
Specify this mode when the telephone line is to be used only for faxing. Faxes are automatically received on
detection of the set number of rings. During reception "Receiving" is displayed on the message display part
of the screen.
2
Note
The message is not displayed when [RX Display] is set to [No].
This mode operates when the [Receive Mode] is set to [Auto RX] in the [Line Parameter Setting] of the Utility
mode.
!
Detail
Refer to "Specifying transmission/receiving mode (Line Parameter Settings)" on page 10-43 regarding
reception mode and settings for the number of incoming rings.
Reception starts automatically
Incoming
Received
original