Konica Minolta FK-502 User Manual
Page 129
C650
6-11
Useful transmission functions
6
5
Select [Top], [Left], [Frame: Right], [Bottom], [Frame] and set the respective erase values.
–
When a frame on a specify position is not to be erased, touch the button of the desired frame and
then touch [None]. When [None] is to be cancelled, press the keypad or [+] button and specify the
erase quantity.
–
Touch [No] to cancel the frame erase settings.
–
For European models (Metric)
For setting the Frame Erase values in European models (Metric), press the keypad or [-] and [+].
"Input Error" is displayed when a numerical value outside the range is input. When "Input Error" is
displayed or when there is any mistake while entering the deletion width, press [C] (clear) key and
enter the value again.
–
For North American models (Inch)
For setting the Frame erase values in North American models (Inch) with fraction display, touch
[
], change the numerator and denominator and then touch [-] or [+].
In case of setting the frame erase values for numeric display in North American models (Inch), press
keypad or [-] and [+]. "Input Error" is displayed when a numerical value outside the range is input.
When "Input Error" is displayed or when there is any mistake while entering the deletion width, press
[C] (clear) key and enter the value again.
For details on switching between decimal and fraction values, refer to the User’s Guide [Copy
Operations].
6
Touch [OK].
Returns to Erase screen.
7
Touch [Close].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen.