Konica Minolta FK-502 - Manual (Page 230)

C650 10-10
Utility mode 10
Administrator Settings > Fax Settings > PBX Connection Setting
The connection procedure of PBX telephone line is set. (page 10-67)
Administrator Setting > Fax Setting > Report Settings
The printing method for report is set (page 10-69)
Administrator Settings > Fax Settings > Job Settings List
List of Fax setup values specified in this machine can be printed. (page 11-38)
Item Description Values that can be set
PBX Connection Setting This machine is valid when connected to
PBX telephone line.
When these settings are valid, external
line number is set within the range 0-
9999. The Outside line number is a
number to connect to Outside line as 0
of 0 transmission.
When fax number registered in Program
destination and Address Book is set in
ISD, ISD number set here is dialed be-
fore the registered telephone number. (Outside line number setting) / No*
Item Description Values that can be set
Activity Report Select whether or not to print the report,
and when to print it.
If "Daily" is selected, the report is print-
ed every day at a fixed time.
If "100/daily" is selected, a report is
printed that contains information about
the latest 100 communications that
were completed since the last report
was printed. In addition, the report is
printed every day at a fixed time. ON*/OFF
Following settings are made when set to
[ON].
Output Settings: Daily/ Every 100
Comm.*/100/Daily
If "Daily" or "100/daily" is selected, set-
tings can be specified for the following.
Output Time Settings: 00:00 to 23:59
(9:00*)
TX Result Report Whether or not to print the report is set
and when the report is to be printed is
set. ON/If TX Fails*/OFF
Sequential TX result Report ON*/OFF
Timer Reservation TX Report ON*/OFF
Confidential RX Report ON*/OFF
Bulletin TX Report ON*/OFF
Relay TX Result Report ON*/OFF
Relay Request Report ON*/OFF
PC-FAX TX Error Report ON/OFF*
Broadcast Result Report The printing methods for broadcast re-
sult report are set. All Destinations*/Each Destination
TX Report Check Whether or not to display the transmis-
sion report selection screen is set. When
set to [ON], it is displayed every time
there is a transmission. ON/OFF*