Konica Minolta FK-502 - Manual (Page 184)

C650 8-8
Polling 8
8.3 Polling after specifying the original (Bulletin board)
In this machine, the original that is to be browsed can be posted and original that is to be polling transmitted
can be stored by registering the bulletin board. The procedures to register originals on a bulletin board and
to receive originals registered on the bulletin board of the sender’s machine by polling are explained below.
!
Detail
This function can be used only if the sender’s fax machine has F-code functions. For details on F-code,
refer to "Fax glossary" on page 12-6.
If "User Box" in the Default Function Permission screen (displayed from the User Authentication
Settings screen) is set to "Restrict", bulletin board operations cannot be performed.
Registering an original on a bulletin board
Follow the procedure given below to register an original on a bulletin board.
2
Note
Only one original can be registered on one bulletin board. When another original is already registered
on the specified bulletin board, it is overwritten.
Following functions cannot be used simultaneously.
Send & Print, Quick Memory TX, Total # of Pages, Polling TX, Timer TX, Overseas TX mode, ECM OFF,
Password TX, V. 34 OFF, and F-Code TX
!
Detail
It is necessary to register the Bulletin Board User Box in advance. For details on registering a Bulletin
Board User Box, refer to "Specifying bulletin board settings" on page 9-26.
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to "Loading the original" on page 2-6.
3
Touch [Communication Settings].
4
Touch [Communication Method Settings].
5
Touch [Polling TX].