Konica Minolta FK-502 - Manual (Page 66)

C650 2-24
To send a fax 2
2.6 Sending a fax using a program destination
When a program address has been registered, a fax can be sent by specifying the registered program button.
If transmission settings (Original type and original specification etc.) are registered by a program key, a fax
can be sent by simply touching that button without the need for specifying function settings each time.
It is also possible to register a group button in 1 program button to send a fax once or register a time and
send faxes at the same time each day.
To send a fax after specifying a program destination
1
Press [Fax/Scan] key, and the Fax/Scan screen is displayed.
2
Load the original to be faxed.
– Refer to "Loading the original" on page 2-6 for details on loading the original.
3
Press [Mode Memory] key.
4
Touch [Page List].