Konica Minolta FK-502 - Manual (Page 283)

C650 10-63
Utility mode 10
10.24 Distributing the received original per sender (TSI User Box Setting)
Whether or not to use the TSI User Box Setting function is set. When it is used, the TSI User Box is registered.
The originals received by sender’s fax number (TSI) is transmitted to distribution destination (box destination/
e-mail address/ FTP address/SMB address/WebDAV address) set for each sender.
TSI User Box Setting: Yes/No*
- Following settings are specified when set to [ON].
Action when TSI User Box is not set: Automatically Print*/Memory RX User Box
- The operation when unregistered TSI information is received, is set.
Print: Yes/No*
- Whether it is printed after reception or not is set.
TSI User Box Registration
* is a default value at the time of procurement.
2
Note
When the transmission does not end normally, the received original is printed.
When [TSI User Box Setting] are set to [Yes], [Memory RX Setting], [Forward TX Settings] and[PC-FAX
RX Setting] cannot be used.
"Print" is valid only when distribution destination is E-mail/FTP/SMB/WebDAV address.
Specifying the TSI User Box Setting
1
Display the Administrator Settings screen as described in "Displaying Administrator Settings screen"
on page 10-3.
2
Touch [Fax Settings].
– Some items may not be displayed according to setting options.
1000
2000
E-Mail
FTP
Original
Hard disk Sender
Box
E-Mail server
FTP server
SMB server
SMB
WebDAV server
WebDAV