Fax mode screens, Fax mode screens -5 – Konica Minolta FK-502 User Manual
Page 32
C650
1-5
Before using this machine
1
Fax Mode screens
The Fax/Scan screen appears when the [Fax/Scan] key on the control panel is pressed.
The displayed destination or function can be selected by using your finger to lightly touch the button
displayed on the screen.
13
12
11
15
14
10
17
16
1
3
6
2
4
5
7
9
8
No.
Name
Description
1
[Check Job] button
Displays a list of selected destinations in the left panel of the screen.
2
[Job List] button
Displays a list of jobs being executed and a list of pending jobs in the left panel
of the screen.
3
[Address Book] tab
Displays a screen for selecting a registered destination. (page 2-13)
4
Message display area
Displays machine status and operating procedures that need to be carried out
at that time.
5
[Direct Input] tab
Displays a screen for entering destinations directly. (page 2-17)
6
[Job History] tab
Displays a screen for selecting destinations from the Job History. (page 2-18)
7
[Address Search] tab
Displays a screen for searching for destinations on the LDAP server.
(page 2-18, page 2-20)
8
No. of destinations
Displays the no. of destinations specified.
9
[Off-Hook] button
This is touched for manual transmission or reception. (page 2-35, page 3-4)
When this button is touched the telephone line tone is heard through the
speaker.
10
Setting area
This area is for setting destinations and functions.
11
[Communication Settings]
button
Displays a menu for line settings and settings concerning timer transmissions
and communications in general. (page 6-4)
12
[Original Settings] button
Displays a menu for original-related settings such as mixed original and origi-
nal binding positions. (page 6-3)
13
[Scan Settings] button
Displays a menu for settings concerning the scanning process, such as origi-
nal image quality and resolution. (page 2-9, page 6-2)
14
Remaining memory
Displays the amount of memory remaining during operation.
15
Remaining toner
Displays the amount of toner remaining.
16
Left panel
Displays the job list and destination list.
17
Destination display section
Displays the destination specified.