beautypg.com

Konica Minolta FK-502 User Manual

Page 139

background image

C650

6-21

Useful transmission functions

6

Touch [Corner] or [2 Position] to specify the staple margins and touch [None] to cancel the staple
margins.

6

Touch [Close].

Returns to Scan Settings screen.

7

Touch [OK].

Returns to Fax/Scan screen.

8

Set other functions if required.

For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.

For details on Original Settings, refer to "Original Settings" on page 6-3.

For details on Communication Settings, refer to "Communication Settings" on page 6-4.

9

Specify the destination.

For details on specifying destination, refer to "Specifying only one destination" on page 2-13 and
"Specifying multiple destinations (Sequential broadcast transmission or broadcast transmission)"
on page 2-22.

10

Press [Start] key.

If the fax cannot be sent because the recipient’s line is busy, the recipients number is redialed. For
details on redial, refer to "When unable to send fax" on page 2-31.

To stop the transmission, refer to "Aborting transmission" on page 2-36.

When fax cannot be sent, refer to "Fax cannot be sent" on page 4-2.

The scanned original is stored in the memory as a scheduled job and transmission is started. It is copied
at the same time.

This manual is related to the following products: