Select line settings – Konica Minolta FK-502 User Manual
Page 160
C650
6-42
Useful transmission functions
6
6.19
Sending the fax after specifying the telephone line (Select Line
settings)
Select Line settings
When the fax multi line is installed, transmission is possible after specifying [Line 1] or [Line 2].
2
Note
Fax multi line must be installed.
Line cannot be specified when "Line 2 Settings" of [Multi Line Settings] is [RX Only].
!
Detail
For details on [Multi Line Settings], refer to "Specifying the communication methods of Extended
telephone lines (Multi Line Settings)" on page 10-76.
Sending the fax after specifying the telephone line
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
–
For details on loading originals, refer to "Loading the original" on page 2-6.
3
Touch [Communication Settings].
4
Touch [Line Settings].
5
Select the telephone line that is to be used from "Select Line".
–
If [Unset] is selected, an available line, either Line 1 or Line 2, is used for transmission. If both lines
are available, Line 1 takes precedence and is used.