Konica Minolta FK-502 - Manual (Page 207)

C650 9-19
Registering/Specifying Settings 9
9.5 Changing the destination level (Apply Levels/Groups to Destinations)
Apply Levels/Groups to Destinations
This function is used for information security to specify specific destination information so that only a specific
person can access. It can be used in conjunction with user authentication and information on the destination
level that matches the specified user level can be accessed.
The [Apply Levels/Groups to Destinations] in [One-Touch/User Box Registration] levels can be changed
within the level permitted in the [Apply Levels/Groups to Destinations] in [User Authentication/Account Track].
2
Note
Level settings can be set from "Level 0 (Low)" - "Level 5 (High)" and can be changed only to Level 0,
Level 1, Level 2 and Level 3 for users who are permitted up to Level 3.
!
Detail
For details on the user authentication, refer to the User’s Guide [Copy Operations].
For details on [Apply Levels/Groups to Destinations] in [User Authentication/Account Track], refer to
"Protecting the destination information (Limiting Access to Destinations)" on page 10-33.
Changing destination levels
1
Press [Utility/Counter] key to display the Utility mode screen.
2
Touch [One-Touch/User Box Registration].
– In the Utility mode, the number displayed on button can be entered and selected on the keypad. For
[One-Touch/User Box Registration], enter [1] on the keypad.
– [One-Touch/User Box Registration] cannot be registered or changed when [Registering and
Changing Addresses] is set to [Restrict] in the Utility mode. Contact the administrator to register or
change the [One-Touch/User Box Registration].