Konica Minolta FK-502 - Manual (Page 265)

C650 10-45
Utility mode 10
10.17 Settings of transmission and reception mode (TX/RX Settings)
Handling the file at the time of polling transmission or printing methods at the time of reception are set.
Duplex Print (RX): ON/OFF*
- When set to [ON], the received original is printed on both sides of the paper.
- When [Print Separate Fax Pages] is [ON], it is not displayed.
Letter/Ledger over A4/A3: European models: ON/OFF*, North American models: ON*/OFF
- When it is set to [ON] inch system paper is selected on priority for the printing paper of received original.
Print Paper Selection: Auto Select*/Fixed Size/Priority Size
- When the default size is specified:
The paper is printed by the default size. When priority size is not set, it is printed in the paper of the
nearest size.
- When the fixed size is specified:
The paper is printed by the fixed size only.
Print Paper Size
*1
: European models: A3 / B4 / A4* / 8-1/2 Ч 11 / 8-1/2 Ч 14 / 11 Ч 17, North American model:
8-1/2 Ч 11* / 8-1/2 Ч 14 / 11 Ч 17 / A3 / B4 / A4
- The paper size to output the received original is specified.
Initial setting differs as per settings of [Letter/Ledger over A4/A3].
-
*1
Set the [Tray Selection for RX Print] to [Auto] to validate the setting of [Print Paper Size].
Incorrect User Box No. Entry: Print*/Show Error Message/Auto Create User Box
- Operation when unregistered box number is specified is set for the fax reception-using box. [Auto
Create User Box] is selected, box of entered number is created.
- [Auto Create User Box] cannot be selected when the password rules are set to ON.
For details on the password rules, refer to the User’s Guide [Copy Operations].
Tray Selection for RX Print *2 : Auto */ Tray 1/ Tray 2/ Tray 3/ Tray 4
- Paper tray is set when paper tray used in output of the received originals is to be fixed.
-
*2
Type of the tray differs as per the loaded option.
Min. Reduction for RX Print: 87- 96%*/Full Size
*3
- Output magnification of received original is set.
- *3 When the [Min. Reduction for RX Print] at the time of printing the original is set to [Double], the
settings of the [Print Paper Selection], [Tray Selection for RX Print] function become [Auto]. Moreover,
the [Print Separate Fax Pages] becomes [OFF].
Print Separate Fax Pages *4 : ON/OFF*
- If it is set to [ON], the original longer than the fixed size is received and printed by page division.
-
*4
When [Duplex Print (RX)] is [ON], it is not displayed.
File After Polling TX: Delete*/Save
- Set whether to delete the original after the completion of polling transmission.
No. of Sets (RX): 1*-10
- Number of copies (prints) of received original is set.
* is a default value at the time of procurement.
Specifying TX/RX Settings
1
Display the Administrator Settings screen as described in "Displaying Administrator Settings screen"
on page 10-3.