Scan size, Sending the fax after specifying the scan size, Touch [scan size – Konica Minolta FK-502 User Manual
Page 135
C650
6-17
Useful transmission functions
6
6.6
Sending a fax after specifying the scan size of the original (Scan Size)
Scan Size
Scan Size is a function to send the fax after specifying the scan size of the original.
When the paper width on the recipient’s side is smaller than the paper size of the original that is sent, the
original is reduced and then printed. When the original is not to be reduced, and the scan size is specified for
the paper size on the recepient’s side, the original of the original size can be sent.
2
Note
The original scanning position of an original loaded on ADF is different from the original scanning
position of an original loaded on original glass.
When Scan Size and Mixed Original setting are specified at the same time, the size specified in Scan
Size setting is applied.
Following functions cannot be used simultaneously.
Quick Memory TX, Polling RX, Total # of Pages and Bulletin board polling RX
Sending the fax after specifying the scan size
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
–
For details on loading originals, refer to "Loading the original" on page 2-6.
3
Touch buttons in order of [Scan Settings], [Application].
4
Touch [Scan Size].
JAPAN
CHINA
AUSTRALIA
Indian Ocean
PAPUA
NEW GUINEA
INDONESIA
PHILIPPINES
MONGOLIA
THAILAND
VIETNAM
MALAYSIA
SINGAPORE
BRUNEI
Taiwan
NORTH KOREA
SOUTH KOREA
CAMBODIA
LAOS
NMAR
BHUTAN
LADESH
RUSSIA
JAPAN
CHINA
PHILIPPINES
GOLIA
LAND
VIETNAM
ALAYSIA
INGAPORE
BRUNEI
Taiwan
NORTH KOREA
SOUTH KOREA
AMBODIA
OS
RUSSIA