Konica Minolta FK-502 - Manual (Page 165)

C650 6-47
Useful transmission functions 6
6
Touch [SUB Address] and enter the confidential box number of the recipient’s fax machine with the
keypad.
– When communication password is required, press [Password] and enter the communication
password.
– Up to 20 digits can be entered in the SUB Address and Password. When the recipient’s fax machine
is FK-502, enter the confidential box number within 9 digits and the password within 8 digits. In
other cases, it differs depending on the recipient’s fax machine.
– Numbers 0-9 and # and * can be entered in the password.
– If an incorrect number has been entered, touch [Delete] and then correct the number.
– When [C] (clear) key is pressed, all entered contents are deleted.
– Touch [No] to cancel the settings.
7
Touch [OK].
Returns to the Communication Method Settings screen.
8
Touch [OK].
Returns to Communication Settings screen.
9
Touch [Close].
Returns to Fax/Scan screen.
10
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
11
Specify the destination.
– For details on destination, refer to "Specifying only one destination" on page 2-13, "Specifying
multiple destinations (Sequential broadcast transmission or broadcast transmission)" on page 2-22.
12
Press [Start] key.
– Press [Stop] key to stop the original registration.
The scanned original is stored in the memory as a scheduled job and transmission is started.