Konica Minolta FK-502 - Manual (Page 334)

C650 11-27
Reports and Lists 11
11.15 Relay Request Report
Relay Request Report is printed automatically when an original is received from originating station as
intermediate relay station.
ON/OFF can be set in [Relay Request Report] of the Utility mode.
Destination: Any of the following is described.
- Destination name when destination name is registered in Address Book.
- Recipient’s telephone number
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Prints: Describes the number of sheets sent.
Result:
Note: One of the following is described.
OK: Described when communication is terminated normally.
S-OK: Described when communication has stopped.
PW-OFF: Described when operation power switch was turned OFF during communication.
TEL: Described when there is telephone call.
NG: Described when there is communication error.
Cont: Described when there is a transmission error and that there is transition to resend
wait mode (Error page redial).
No Ans: Described when there is no response from the recipient.
Busy: Described when communication is not possible as the recipient’s line is busy.
M-Full: Described when it is not possible to receive a fax when the fax file memory becomes
full during reception.
L1 Main line
TMR Timer communication
ORG Original size specification
MIX Mixed Original transmission
CSRC Telediagnosis
PC PC-FAX
SP Special Original
RTX Resending
MBX Confidential
L2 Sub-line
POL Polling
FME Frame Erase transmission