Send & print, Sending the fax after specifying send & print – Konica Minolta FK-502 User Manual
Page 138
C650
6-20
Useful transmission functions
6
6.7
Copying the original at the same time as sending the Fax (Send & Print)
Send & Print
It is a function to copy at the same time as Fax transmission. Number of copies can be increased and 2-Sided
printing and staple margins can be set.
2
Note
In order to use the staple function, the optional finisher must be installed.
Following functions cannot be used simultaneously.
Quick Memory TX, Polling TX
If "Print Scan/Fax TX" in the Default Function Permission or Function Permission screen in User
Authentication Settings is set to "Restrict", the Send & Print function cannot be used.
Sending the fax after specifying Send & Print
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
–
For details on loading originals, refer to "Loading the original" on page 2-6.
3
Touch [Scan Settings] and then [Application].
4
Touch [Send & Print].
5
Select the desired end settings and touch [OK].
–
Enter the desired number of copies with the keypad to specify the number of copies.
–
When [C] (clear) key is pressed, the number of copies return to 1.
–
Touch [1-Sided] or [2-Sided] to specify Simplex/Duplex printing.