Konica Minolta FK-502 - Manual (Page 127)

C650 6-9
Useful transmission functions 6
5
To increase the clarity of the edges, touch [ ] on + side, and to smoothen the text, touch [ ]
on - side.
6
Touch [OK].
Returns to Quality Adjustment screen.
7
Touch [OK].
Returns to Scan Settings screen.
8
Touch [OK].
Returns to Fax/Scan screen.
9
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
10
Specify the destination.
– For details on destination, refer to "Specifying only one destination" on page 2-13 and "Specifying
multiple destinations (Sequential broadcast transmission or broadcast transmission)" on page 2-22.
11
Press [Start] key.
– If the fax cannot be sent because the recipient’s line is busy, the recipients number is redialed. For
details on redial, refer to "When unable to send fax" on page 2-31.
– To stop the transmission, refer to "Aborting transmission" on page 2-36.
– If the fax could not be sent, refer to "Fax cannot be sent" on page 4-2.
The scanned original is stored in the memory as a scheduled job and transmission is started.