Konica Minolta FK-502 - Manual (Page 50)

C650 2-8
To send a fax 2
4
Load the original on the original glass or in the ADF, and
touch [Scan Settings], [Separate Scan], [OK] and then
press [Start] key.
– When using the original glass and the ADF, the ADF is
given priority.
– For details on loading originals in the ADF, refer to
"Loading the original in the ADF" on page 2-6, and for
details on loading originals on the platen glass, refer
to "Loading the original on the original glass" on
page 2-6.
5
Load the original sequentially in the ADF or on the original glass and press [Start] key.
– Touching [Change Setting] enables you to alter 1-Sided/2-Sided settings and Frame Erase settings.
– Repeat this operation until you have scanned the entire original you wish to send.
The scanned original is stored in the memory.
6
Touch [Finish].
7
Press [Start] key.
Transmission begins.