Konica Minolta FK-502 - Manual (Page 34)

C650 1-7
Before using this machine 1
1.3 Initial settings
After installation, the following settings must be made in order to use fax functions. If the following settings
are not correctly made, fax communications may not be possible. Please ensure these settings are
registered.
Date/Time Settings
- Date/Time Settings
Specify the current date and time.
For details on setting the date and time, refer to the User’s Guide [Copy Operations].
- Time zone
Specify the standard time zone for each region in the world.
Header Information
- Sender
The transmission source name is this machine’s name and is recorded as part of the transmission
source record written at the top of the sent original. Register a name of 30 characters or less.
Refer to "Registering transmission source name and fax number (Header Information)" on page 10-38
for details.
- Sender Fax No.
Normally, the fax number for this machine is registered as the Sender Fax No. Numerical characters
from 0 to 9, +, space, * and # are used, and 20 digits or less are registered for the Sender Fax No.
Line Parameter Setting
- Dialing Method
For North American model, a touch-tone line or a rotary dial (pulse) line (10pps) can be selected. For
European model, only a touch-tone line can be selected.
Refer to "Specifying transmission/receiving mode (Line Parameter Settings)" on page 10-43 for details.
- Receive Mode
Auto reception and manual reception can be selected.
Set the machine to auto reception to receive faxes automatically. If the phone line is often busy because
an external telephone line is connected, set the machine to manual reception.