Konica Minolta FK-502 - Manual (Page 47)

C650 2-5
To send a fax 2
– When the Destination Check Display Function function is set, the Destination Settings screen is
displayed. Confirm that the destination is correct and touch [Send]. For details, refer to the "Sending
the fax after reconfirming the destination (Destination Check Display Function)" on page 6-41.
– To abort tranmission of a fax, press [Stop] key.
– For details on situations in where you are unable to send a fax, refer to "Fax cannot be sent" on
page 4-2.
– If the fax could not be sent, a TX Result Report is printed (when the machine has been set to print
a TX Result Report). And, it can be set such that the TX Result Report Check screen is displayed so
as to enable the selection of whether or not to output the transmission result report for every
transmission. For details on report printing procedures, refer to the "Specifying the printing methods
for report (Report Setting)" on page 10-69.
– For details on TX Result Reports, refer to "TX Result Report" on page 11-8.
Scanning of the original begins, and the original is sent.