4 polling tx report, Polling tx report -10 – Konica Minolta FK-502 User Manual
Page 317
C650
11-10
Reports and Lists
11
11.4
Polling TX Report
Polling TX Report is printed automatically.
ON / If TX Fails / OFF can be set for [TX Result Report] in the Utility mode.
Destination: Recipient’s machine ID is described.
Start Time: Describes the start time of the communication.
Time: Describes the time required for communication.
Number of sheets:
Describes the number of sheets sent. In case of memory transmission, the sent pages and the total number
of pages are described in fractional format.
Result:
Note: One of the following is described.
OK:
Described when communication is terminated normally.
S-OK:
Described when communication has stopped.
PW-OFF:
Described when operation power switch was turned OFF during communication.
TEL:
Described when there is telephone call.
NG:
Described when there is communication error.
Cont:
Described when there is a transmission error and that there is transition to resend
wait mode (Error page redial).
No Ans:
Described when there is no response from the recipient.
Busy:
Described when communication is not possible as the recipient’s line is busy.
M-Full:
Described when it is not possible to receive a fax when the fax file memory becomes
full during reception.
L1
Main line
TMR
Timer communication
ORG
Original size specification
MIX
Mixed Original transmission
CSRC
Telediagnosis
PC
PC-FAX
SP
Special Original
RTX
Resending
MBX
Confidential
L2
Sub-line
POL
Polling
FME
Frame Erase transmission
CALL
Manual communication