Konica Minolta FK-502 - Manual (Page 193)

C650 9-5
Registering/Specifying Settings 9
– Numbers of up to 38 digits can be entered.
– If there is a wrong entry, delete 1 character at a time by touching [Delete] or delete all by pressing
[C] (clear) key and correct the entry.
– [Tone] : If pulse dialing is being used, touch this button to send a push-button tone. Use Tone when
fax information service is being used. Tone is displayed as "T" on the screen.
– [Pause] : Touch this button to insert a pause when dialing. Touch [Pause] once to insert a 1-second
pause. In addition multiple pauses can be entered. It is displayed as "P" on the screen.
– [-] : Touch this button to insert a delimiter during dialing. It has no effect on the dailing. It is displayed
as "-" on screen.
– [ →] : Moves the cursor to the right.
– [ ←] : Moves the cursor to the left.
– [Delete] : The characters before the cursor are deleted one by one.
– [Outside] : When [PBX Connection Setting] are valid, [Outside] is displayed and the outside line can
be specified. If selected, it is displayed as "E-".
– When [PBX Connection Setting] are valid, and a transmission is to be sent from an extension line to
the outside line, touch [Pause] after the outside line access number such as "0" for more secure
dialing. It is displayed as "P" on the screen.
7
For specifying line settings, touch [Line Settings], specify the function and then touch [OK].
8
Touch [ ↑] or [↓].
9
Touch [Index], and then specify the index characters.
10
Touch [Icon], select the desired icon, and then touch [OK].
– The icons are used in the Image Panel function. Image Panel function can be operated when the
optional i-Option LK-101 or i-Option LK-103 is installed.
11
Touch [OK].
– Touch [Cancel] to discontinue the registration.
The destinations are registered and displayed in a list.
12
Touch [Close].
– Returns to procedure 4 when the registration of Address Book is to be continued.
13
Touch [Close] until it returns to Fax/Scan screen.
!
Detail
For details on PBX Connection Setting, refer to "Specifying the function related to private branch
exchange (PBX Connection Setting)" on page 10-67.
For details on Line Settings, refer to "Sending the fax after specifying the telephone line (Select Line
settings)" on page 6-42.