Konica Minolta FK-502 User Manual
Page 170
C650
6-52
Useful transmission functions
6
–
For North American model, [Header Position] of the Utility mode cannot be set to [OFF].
6
Select the desired sender name from the list to change the sender name.
7
Touch [OK].
Returns to Communication Settings screen.
8
Touch [Close].
Returns to Fax/Scan screen.
9
Set other functions if required.
–
For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
–
For details on Original Settings, refer to "Original Settings" on page 6-3.
–
For details on Communication Settings, refer to "Communication Settings" on page 6-4.
10
Specify the destination.
–
For details on destination, refer to "Specifying only one destination" on page 2-13 and "Specifying
multiple destinations (Sequential broadcast transmission or broadcast transmission)" on page 2-22.
11
Press [Start] key.
–
If the fax cannot be sent because the recipient’s line is busy, the recipients number is redialed. For
details on redial, refer to "When unable to send fax" on page 2-31.
–
To stop the transmission, refer to "Aborting transmission" on page 2-36.
–
If the fax could not be sent, refer to "Fax cannot be sent" on page 4-2.
The scanned original is stored in the memory as a scheduled job and transmission is started.