Konica Minolta FK-502 - Manual (Page 167)

C650 6-49
Useful transmission functions 6
5
Touch [F-Code TX].
6
Enter the relay box number of the relay station in the [SUB Address] with the keypad.
– Up to 20 digits can be entered in the [SUB Address] and [Password].
– Relay password is mandatory. Numbers 0-9 and # and * can be entered in the password.
– If an incorrect number has been entered, touch [Delete] and then correct the number.
– When [C] (clear) key is pressed, all entered contents are deleted.
– Touch [No] to cancel the settings.
7
Touch [Password] and enter the relay password.
8
Touch [OK].
Returns to the Communication Method Settings screen.
9
Touch [OK].
Returns to Communication Settings screen.
10
Touch [Close].
Returns to Fax/Scan screen.
11
Set other functions if required.
– For details on Scan Settings, refer to "Specifying scanning conditions" on page 2-9 or "Scan
Settings" on page 6-2.
– For details on Original Settings, refer to "Original Settings" on page 6-3.
– For details on Communication Settings, refer to "Communication Settings" on page 6-4.
12
Specify the destination of Intermediate relay station.
– For details on destination, refer to "Specifying only one destination" on page 2-13 and "Specifying
multiple destinations (Sequential broadcast transmission or broadcast transmission)" on page 2-22.
13
Press [Start] key.