Konica Minolta FK-502 User Manual
Page 225
C650
10-5
Utility mode
10
User Settings > Scan/Fax Settings > Default Scan/Fax Settings
Set the initial values of Fax/Scan screen. (page 10-19)
Administrator Settings > System Settings > Power Save Settings
Set the power save mode settings. (page 10-21)
Administrator Settings > System Settings > Output Settings > Print/Fax Output Settings
The printing method for received original is set. (page 10-23)
Administrator Settings > System Settings > Restrict User Access > Restrict Access to Job Settings >
Registering and Changing Address
Whether or not to prohibit changes in the registered destination of Fax is set. (page 10-25)
Administrator Settings > System Settings > Restrict User Access > Restrict Operation > Restrict
Broadcasting
Whether or not to prohibit sending a fax to multiple destinations is set. (page 10-27)
Administrator Settings > System Settings > Reset Settings > Job Reset > Next Job > Reset Data After
Job
Select whether the settings are reset to their defaults or whether they remain for the next fax. (page 10-29)
Item
Description
Values that can be set
Default Scan/Fax Settings
Set the initial values of Fax/Scan func-
tions.
Current Setting/Factory Default*
Item
Description
Values that can be set
Enter Power Save Mode
When a fax is received in power save
mode, settings about whether to shift to
the power save mode after a fixed peri-
od of time and after the completion of
print (normal state) or to shift to power
save mode immediately (instant) are
made.
Normal/Immediately*
Item
Description
Values that can be set
Fax
The printing method for received original
is set.
Batch Print*/Page Print
Item
Description
Values that can be set
Registering and Changing Ad-
dress
Whether or not to prohibit changes in
the registered destination of Fax is set.
Allow*/Restrict
Item
Description
Values that can be set
Restrict Broadcasting
Whether or not to prohibit sending a fax
to multiple destinations is set.
ON/OFF*
Parameter
Description
Values that can be set
Reset Data After Job
Select whether the settings are reset to
their defaults or whether they remain for
the next fax.
Reset All*/Reset Destination Only /Con-
firm with User