Communication settings, Communication settings -4 – Konica Minolta FK-502 User Manual
Page 122
C650
6-4
Useful transmission functions
6
Communication Settings
2
Note
Following buttons are disabled in Fax mode.
[E-Mail Settings]
[URL Notification Setting]
[Total # of Pages (Quick Memory TX)]
Function to send the fax with the total number of pages of
the original during quick memory transmission.
→page 2-44
[Despeckle]
Function that reduces the effect that the dust from the left
partition glass has on the scan data when scanning an
original from the ADF.
Screen display
Description
Screen display
Description
[Line Settings]
[Overseas TX]
Function that sends the information at a slow transmis-
sion speed if the original is to be sent to areas where
communication facilities are bad.
[ECM OFF]
Function that sends information after turning Off the ECM
mode.
[V. 34 OFF]
Function that sends information after turning Off the su-
per G3 mode, if super G3 mode cannot be used due to
limitations of the exchange, etc.
"Check Dest. & Send"
Function that prevents transmission to incorrect fax
number. Compares the specified fax number and recipi-
ent’s fax number information (CSI) and faxes only if they
match.
"Select Line"
Specifies the telephone line settings to be used for trans-
mission.