Figure 3-1 – Teledyne 9110EH - Nitrogen Oxides Analyzer User Manual

Page 24

Getting Started Model 9110EH Instruction Manual

Figure 3-1: Location of Shipping Screws and Power Configuration Plug

NOTE

Save these shipping screws and re-install them whenever the unit is shipped.

A certain ventilation clearance is required for the operation of the analyzer:

Area

Minimum required clearance

Back of the instrument

10 cm / 4 inches

Sides of the instrument

2.5 cm / 1 inch

Above and below the instrument

2.5 cm / 1 inch

Various rack mount kits are available for this analyzer. See Chapter 5 of this manual for

more information.

10 M9110EH Rev 0