Teledyne 9110EH - Nitrogen Oxides Analyzer - Manual (Page 16)

Model 9110EH Instruction Manual M9110EH Documentation
2.0 Specifications and Warranty
A list of the analyzer’s performance specifications, a description of the conditions and
configuration under which EPA equivalency was approved and T-API’s warranty statement.
3.0 Getting Started
Concise instructions for setting up, installing and running your analyzer for the first time.
4.0 FAQ & Glossary:
Answers to the most frequently asked questions about operating the analyzer and a
glossary of acronyms and technical terms.
5.0 Optional Hardware & Software
A description of optional equipment to add functionality to your analyzer.
6.0 Operation Instructions
Step by step instructions for operating the analyzer.
7.0 Calibration Procedures
General information and step by step instructions for calibrating your analyzer.
8.0 EPA Protocol Calibration
Specific information regarding calibration requirements for analyzers used in EPA-regulated
monitoring applications.
9.0 Instrument Maintenance
Description of preventative maintenance procedures that should be regularly performed on
you instrument to assure good operating condition. This includes information on using the
iDAS to predict possible component failures before they happen.
10.0 Theory of Operation
An in-depth look at the various principals by which your analyzer operates as well as a
description of how the various electronic, mechanical and pneumatic components of the
instrument work and interact with each other. A close reading of this section is invaluable
for understanding the instrument’s operation.
11.0 Troubleshooting & Repair
This section includes pointers and instructions for diagnosing problems with the instrument,
such as excessive noise or drift, as well as instructions on performing repairs of the
instrument’s major subsystems.
Appendices
For easier access and better updating, some information has been separated out of the
manual and placed in a series of appendices at the end of this manual. These include
2 M9110EH Rev 0