Nortel Networks Circuit Card 311 - Manual (Page 884)

884 NTAK10 2.0 Mb DTI card
• per-channel and all-channel loopback capabilities for near-end and
far-end
• self-test
• download of incoming ABCD validation times from software
• warm SYSLOAD (TS16 AS16 transmitted)
The NTAK10 provides the following features and functions:
• a clock controller that can be switched in as an option
• software-selectable A/µlaw operation
• software-selectable digital pads on a per channel basis
• frame alignment and multiframe alignment detection
• frame and multiframe pattern generation
• CRC-4 transmission and reception (software selectable)
• card status and alarm indication with faceplate-mounted LEDs
• Periodic Pulse Metering (PPM) counting
• outpulsing of digits on any of the abcd bits
• Card-LAN for maintenance communications
• per-channel and all-channel loopback capabilities for near-end and
far-end
• self-test
• download of incoming abcd validation times from software
• warm SYSLOAD (TS16 AS16 transmitted)
The NTAK10 provides the following features and functions:
• a clock controller that can be switched in as an option
• software-selectable A/µlaw operation
• software-selectable digital pads on a per channel basis
• frame alignment and multiframe alignment detection
• frame and multiframe pattern generation
• CRC-4 transmission and reception (software selectable)
• card status and alarm indication with faceplate-mounted LEDs
• Periodic Pulse Metering (PPM) counting
• outpulsing of digits on any of the ABCD bits
• Card-LAN for maintenance communications
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.