Nortel Networks Circuit Card 311 - Manual (Page 292)

292 NT5D33 and NT5D34 Lineside E1 Interface cards
Figure 63
Option 11C Mini chassis or Succession 1.0 MG chassis
3 Use an MGC Breakout Adapter for Option 11C (NTDW63AAE5)
• Connect the adapter to 25 pairs MDF connector at Slot 0
• Connect the MGC DECT Clock Reference Cable (NTDW67AAE5)
to 15-pin DSUB connector on the Breakout Adapter.
Figure 64
"Option 11C Cabinet" (page 292) shows the Option 11C Cabinet.
Figure 64
Option 11C Cabinet
—End—
Man-Machine E1 maintenance interface software
Description
The Man-Machine Interface (MMI) provides E1-link diagnostics and
historical information for the LEI system. See
"Installation and Configuration"
(page 274) for instructions on how to install the cabling and configure the
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.