Nortel Networks Circuit Card 311 - Manual (Page 114)

114 Option settings
disabled off 6 off on on off 14 off on on on
7 on on on off 15 on on on on
*When enabled, this switch prevents a signal from being sent from a paging unit until 5 seconds
elapsed time since the beginning of the previous signal on that same unit.
S5 (E38)
Unit 0
S6 (D1)
Unit 1
Impedance termination 1
Real on
Complex off
QPC595 Digitone Receiver cards
Location Connection
12 DTMF tones E9 Center to E3
16 DTMF tones E9 Center to E2
QPC577, QPC596 Digitone Receiver daughterboards
16/12 tone options jumper Jumper at P1
16 tone (4 x 4) connect pins 1 and 2
12 tone (3 x 4) connect pins 2 and 3
Note: When a DTR daughterboard is installed, check YES on the faceplate of the QPC659 Dual
Loop Peripheral Buffer.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.