Nortel Networks Circuit Card 311 - Manual (Page 473)

Specifications 473
— 60 minutes
• DDN: 1 to 7 digits (0–9)
Operating parameters
There are thirteen parameters configured in the system that are downloaded
to the DAC. They are:
• Dialogue parity
— Space (OFF)
— Mark (ON)
— Even
— Odd
• DTR control
— Dynamic (affected by call progress)
— Forced ON
• DCD control
— Dynamic (affected by call progress)
— Forced ON
• Dialing mode
— Manual (user initiates the call with dialogue commands)
— Hotline (call the Autodial number upon connection)
• Wire test
— Disabled (can be invoked only with front panel switch)
— Enabled (start only if the DAC firmware is idle)
• Language
— English
— Quebec French
• Keyboard dialing
— Enabled (allow both keyboard or Hayes dialing modes)
— Disabled (Hayes dialing only)
• Make port busy
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.