Nortel Networks Circuit Card 311 - Manual (Page 496)

496 NT7D16 Data Access card
Segment 1
Step Action
1 Leave cable E as is in slot L4.
2 Move cable end F-3 to L5-3.
3 Remove cable G from the backplane and connect ends G-1, G-2,
and G-3 to L6-1, L6-2, and L6-3.
4 Add cable H to the I/O panel by connecting ends H-1, H-2, and H-3
to L7-1, L7-2, and L7-3.
—End—
Segment 2
Step Action
1 Leave cable K as is in slot L8.
2 Move cable end L-3 to L9-3.
3 Remove cable M from the backplane and connect ends M-1, M-2,
and M-3 to L10-1, L10-2, and L10-3.
4 Add cable N to the I/O panel by connecting ends N-1, N-2, and N-3
to L11-1, L11-2, and L11-3.
—End—
Segment 3
Step Action
1 Leave cable R as is in slot L12.
2 Move cable end S-3 to L13-3.
3 Remove cable T from the backplane and connect ends T-1, T-2, and
T-3 to L14-1, L14-2, and L14-3.
4 Add cable U to the I/O panel by connecting ends U-1, U-2, and U-3
to L15-1, L15-2, and L15-3.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.