Nortel Networks Circuit Card 311 - Manual (Page 224)

224 NT5D11 and NT5D14 Lineside T1 Interface cards
Figure 39
MGC DECT Clock Reference Cable
Connecting MGC DECT Clock Reference Cable
Step Action
1 Connect the MGC DECT Clock Reference Cable to the AUI port of
the back of the MG1000 chassis.
Figure 40 "MG1000 chassis" (page
224) shows the AUI port of the MG1000 chassis.
Figure 40
MG1000 chassis
2 In the Option 11C Mini chassis or Succession 1.0 MG chassis,
connect to 15-pin DSUB connector on the back panel formerly
used for the 10Base-T AUI connection.
Figure 41 "Option 11C
Mini chassis or Succession 1.0 MG chassis" (page 225) shows
the 10Base-T AUI connection of the Option 11C Mini chassis or
Succession 1.0 MG chassis.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.