Nortel Networks Circuit Card 311 - Manual (Page 1112)

1112 QPC841 Quad Serial Data Interface card
Figure 316
QSDI card option switch locations
Software service changes
Once the QPC841 QSDI card has been installed in the system, the
system software needs to be configured to recognize it. This is done
using the Configuration Record programLD 17. Instructions for running
the Configuration Record program are found in Software Input/Output
Reference — Administration (NN43001-611).
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.