Nortel Networks Circuit Card 311 - Manual (Page 233)

Man-Machine T1 maintenance interface software 233
Command Description
S A Set Alarm parameters
Alarm parameters include the allowable bit errors per second threshold and
alarm duration.
S C Set Clearing
Sets the alarm self-clearing function to either enable or disable.
S D Set Date
Sets date or verifies current date.
S T Set time
Sets time or verifies current time.
T x Test
Initiates the T1 carrier test function. To terminate a test in process, enter the
STOP TEST (S) command at any time.
MMI commands can now be executed. There are seven basic commands
that can be combined together to form a total of 19 command sets. They are:
• Alarm
• Clear
• Display
• Set
• Test
• Help
• Quit
If ? is typed, the MMI lists the above commands along with an
explanation of their usage. A screen similar to the following appears. The
help screen also appears by typing
H , or HELP .
ALARM USAGE: Alarm [Enable | Disable]
CLEAR USAGE: Clear [Alarm] | [Error counter] [Log]
DISPLA
Y USAGE: Display [Alarm | Status | Perform | History] [Pause]
HELP USAGE: Help | ?
SET USAGE: Set [Time | Date | Alarm | Clearing | Name | Memory]
TEST USAGE: Test [Carrier All]
QUIT USAGE: Quit
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.