beautypg.com

Table 264 pad switching algorithm – Nortel Networks Circuit Card 311 User Manual

Page 708

background image

708

NT8D14 Universal Trunk card

The VNL class of service is assigned at the prompt CLS with the response
VNL. The non-VNL class of service is assigned at prompt CLS by selecting
either the Transmission Compensated (TRC) or Non-Transmission
Compensated (NTC) response.

Non-VNL trunks are assigned a TRC or NTC class of service to ensure
stability and minimize echo when connecting to long-haul trunks, such as
TIE trunks. The class of service determines the operation of the switchable
pads contained in each unit. They are assigned as follows:

TRC for a 2-wire non-VNL trunk facility with a loss of greater than 2
dB, or for which impedance compensation is provided, or for a 4-wire
non-VNL facility

NTC for a 2-wire, non-VNL trunk facility with a loss of less than 2 dB, or
when impedance compensation is not provided

See

Table 264 "Pad switching algorithm" (page 708)

for the pad switching

control for the various through connections and the actual port-to-port loss
introduced for connections between the Universal trunk card and any other
IPE or PE port designated as Port B.

Table 264
Pad switching algorithm

Port B pads

Universal Trunk
Pads

Port-to-port loss (dB)

Port B

Transmit
D to A

Receive
A to D

Transmi
D to A

Receive
A to D

Port B to
Universal
trunk
card

Universal
trunk
card to
Port B

IPE line

N/A

N/A

Out

Out

0.5

0.5

Universal trunk (TRC)

In

Out

In

Out

1

1

IPE TIE (VNL)

In

In

Out

Out

0

0

PE line

N/A

N/A

Out

Out

1

1

Note 1: Transmit and receive designations are from and to the Meridian 1. Transmit is from the
Meridian 1 to the external facility (digital-to-analog direction in the Universal trunk card). Receive is
to the Meridian 1 from the external facility (analog-to-digital direction in the Universal

Note 2: When Port B is the call originating port. If the Universal trunk card is the originating port, the
UTC pads are out, the Port B (PE CO/FX/WATS) pads are in.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

01.04

Standard

Release 5.0

23 May 2008

Copyright © 2003-2008, Nortel Networks

.