Nortel Networks Circuit Card 311 - Manual (Page 422)

422 NT7D16 Data Access card
Dialing operations
The DAC supports both keyboard and Hayes dialing sequences. The
following discussion concerns features common to both dialing modes.
Port firmware in idle state
The port firmware is considered idle when it is expecting one of the allowed
autobaud characters. The idle state is identified by either of the following
conditions:
• The last prompt received was RELEASED (keyboard dialing).
• The last prompt received was OK, NO CARRIER, or ERROR (Hayes
dialing).
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Copyright © 2003-2008, Nortel Networks
.