beautypg.com

Table 319 serial port configuration parameters, Applications – Nortel Networks Circuit Card 311 User Manual

Page 818

background image

818

NT8D41AA Serial Data Interface Paddle Board

Table 319
Serial port configuration parameters

Prompt

Response

Description

REQ

CHG

Change configuration.

TYPE

CFN

Configuration type.

IOTB

YES

Change input/output devices.

ADAN

NEW TTY x

New PRT x

Define a new system terminal (printer) port as device x, where x
= 0 to 15.

CDNO

1–16

Use the SDI paddle board number to keep track of all ports.

DENS

DDEN

Double density SDI paddle board.

USER

xxx

Enter the user of port x. The values that can be entered depend on
the software being used. See the Software Input/Output Reference
— Administration
(NN43001-611) for details.

XSM

Yes, (No)

Port is used for the system monitor.

Applications

The NT8D41AA Serial Data Interface paddle board is used to connect the
Meridian 1 switch to a variety of communications devices, printers, and
peripherals. Any RS-232-C compatible device can be connected to either of
the card’s two serial ports.

The standard application for the paddle board is to connect the Meridian
1 switch to the system console. This can be either a direct connection
if the console is located near the switch, or through a modem for remote
maintenance.

Bell 103/212 compatible dumb modems are recommended to connect a
remote data terminal. If a smart modem (such as a Hayes modem) is
used, configure the modem for the dumb mode of operation (Command
Recognition OFF, Command Echo OFF) before connecting the modem
to the asynchronous port.

The serial data interface connectors on the paddle board are not RS-232-C
standard DB-25 connectors. The NT8D84AA interface cable is used to
adapt the paddle board to a non-standard pinout DB-9 connector (normally
located on the I/O panel). The NT8D93 cable is then used to connect the
non-standard DB-9 connector to a peripheral that uses a RS-232-C standard
DB-25 connector. See

Figure 269 "SDI paddle board cabling" (page 819)

.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

01.04

Standard

Release 5.0

23 May 2008

Copyright © 2003-2008, Nortel Networks

.