FUJITSU F2MC-8L F202RA User Manual
Page 19
3
CHAPTER 1 OVERVIEW
•
External interrupt 2 (level detection
× 8 pins, 1 channel) has eight independent inputs and can be used
for wake-up from low-power consumption mode. (L level detection function is supported.)
●
Low-power consumption modes (standby modes)
•
Stop mode (The oscillation is stopped so that current consumption is minimal.)
•
Sleep mode (The CPU is stopped so that the current consumption is reduced by one-third of normal
consumption.)
●
Up to 26 pins of I/O ports
•
General-purpose I/O ports (CMOS): 26 pins (4 of which can be used as N-ch open-drain I/O ports.)
●
Wild registers
•
2-byte data at two addresses are available.
•
When a specific address or data is used on a wild register, the data in the ROM area is changed.
●
16 KB Flash with read protection
•
Once the protection code is written in the specified address, the FLASH content cannot be read by
parallel/serial programmer.