Avago Technologies LSI53C895A - Manual (Page 78)

2-52 Functional Description
Figure 2.8 Block Move and Chained Block Move Instructions
CHMOV 5, 3 when Data_Out
Moves five bytes from address 0x03 in the host memory to the SCSI bus.
Bytes 0x03, 0x04, 0x05, and 0x06 are moved and byte 0x07 remains in
the low-order byte of the
SCSI Output Data Latch (SODL) register and
is married with the first byte of the following MOVE instruction.
MOVE 5, 9 when Data_Out
Moves five bytes from address 0x09 in the host memory to the SCSI bus.
2.2.18.1 Wide SCSI Send Bit
The WSS bit is set whenever the SCSI controller is sending data
(Data-Out for initiator or Data-In for target) and the controller detects a
partial transfer at the end of a chained Block Move SCRIPTS instruction
0x02 0x01 0x00
0x0B 0x0A 0x09 0x08
0x0F 0x0E 0x0D 0x0C
0x13 0x12 0x11 0x10
0x09
0x0B 0x0A
0x0D 0x0C
0x03
0x07 0x06 0x05 0x04
0x04 0x03
0x06 0x05
0x07
Host Memory SCSI Bus
32 Bits 16 Bits