Models 2, Models 2o0154 to 2o0248 and 4o0156 to 4o0414 – Yaskawa Z1000U User Manual
Page 64
<1>
Figure 3.11 Reattaching the Terminal Cover
<1> Connect the ground wiring first, then the main circuit wiring, and finally the control circuit wiring.
u
Models 2o0154 to 2o0248 and 4o0156 to 4o0414
n
Removing the Terminal Cover
1.
Loosen the screws on the terminal cover, then pull down on the cover.
CAUTION! Do not completely remove the cover screws, just loosen them. If the cover screws are removed completely, the terminal
cover may fall off causing an injury.
Figure 3.12 Removing the Terminal Cover
2.
Pull forward on the terminal cover to free it from the drive.
Figure 3.13 Removing the Terminal Cover
n
Reattaching the Terminal Cover
After wiring the terminal board and other devices, double-check connections and reattach the terminal cover.
the Main Circuit Terminal on page 81
Wiring the Control Circuit Terminal
for details on wiring.
3.5 Terminal Cover
64
YASKAWA ELECTRIC TOEP C710636 10B Z1000U HVAC MATRIX Drive User Manual