Yaskawa Z1000U - Manual (Page 232)

6.2 Drive Options and Peripheral Devices
Table 6.1 lists the names of the various peripheral devices, accessories, and options available for Yaskawa drives. Contact
Yaskawa or your Yaskawa agent to order these peripheral devices.
• Peripheral Device Selection: Refer to the Yaskawa catalog for selection and part numbers.
• Peripheral Device Installation: Refer to the corresponding option manual for installation instructions.
Table 6.1 Available Peripheral Devices
Option Model Number Description
Input/Output Option Cards
Analog Input AI-A3
• Allows high precision, high resolution analog reference input
• Input channels: 3
• Voltage input: -10 to 10 Vdc (20 kΩ), 13-bit signed
• Current input: 4 to 20 mA or 0 to 20 mA (250 Ω), 12-bit
Analog Monitor AO-A3
• Provides extra multi-function analog output terminals
• Output channels: 2
• Output voltage: -10 to 10 V, 11-bit (signed)
Digital Input DI-A3
• Sets the frequency reference by digital inputs
• Input channels: 18 (including SET signal and SIGN signal)
• Input signal type: BCD 16-bit (4-digit), 12-bit (3-digit), 8-bit (2-digit)
• Input signal: 24 Vdc, 8 mA
Digital Output DO-A3
• Provides extra insulated multi-function digital outputs
• Photocoupler relays: 6 (48 V, up to 50 mA)
• Contact relays: 2 (250 Vac/up to 1 A, 30 Vdc/up to 1 A)
Communication Option Cards
EtherNet/IP SI-EN3 Connects to an EtherNet/IP network.
Modbus TCP/IP SI-EM3 Connects to a Modbus TCP/IP network.
PROFINET SI-EP3 Connects to a PROFINET network.
LonWorks SI-W3 Connects to a LonWorks network.
DeviceNet SI-N3 Connects to a DeviceNet network
PROFIBUS-DP SI-P3 Connects to a PROFIBUS-DP network.
MECHATROLINK-II SI-T3 Connects to a MECHATROLINK-II network.
MECHATROLINK-III SI-ET3 Connects to a MECHATROLINK-III network.
BACnet SI-B3 Connects to a BACnet network.
EtherCAT SI-ES3 Connects to an EtherCAT network.
CC-Link <1> SI-C3 Connects to a CC-Link network.
CANopen <1> SI-S3 Connects to a CANopen network.
Interface Options
Remote Operator Cable
UWR000051, 1 m cable
UWR000052, 2 m cable
RJ-45, 8-pin straight through, UTP CAT5e, extension cable (1 m or 2 m) to connect the digital
operator for remote operation.
USB Copy Unit JVOP-181
• Allows the user to copy and verify parameter settings between drives.
• Functions as an adapter to connect the drive to a USB port on a PC.
Mechanical Options
Attachment for External
Heatsink
EZZ020786 Installation kit for mounting the drive with the heatsink outside of the panel.
IP20/NEMA Type 1 Kit EZZ020787 Parts to make the drive conform to IP20/NEMA Type 1 enclosure requirements.
IP20/NEMA Type 1, 4, 12
Blank Keypad Kit
UUX0000526
Provides digital operator functionality on an enclosure designed for IP20/NEMA Type 1, 3R, 4,
4X, 12, or IPo6 environment. This keypad has a blank label on the front.
IP20/NEMA Type 1, 4, 12
Yaskawa Logo Keypad Kit UUX0000527
Provides digital operator functionality on an enclosure designed for IP20/NEMA Type 1, 3R, 4,
4X, 12, or IPo6 environment. This keypad has a Yaksawa brand label on the front.
<1> Limited support. Contact a Yaskawa representative or the nearest Yaskawa sales office for assistance.
6.2 Drive Options and Peripheral Devices
232 YASKAWA ELECTRIC TOEP C710636 10B Z1000U HVAC MATRIX Drive User Manual