Yaskawa Z1000U - Manual (Page 313)

No.
(Addr.
Hex)
Name LCD Display Description
Analog
Output Level
Unit
U3-29
(3013)
Time Hours and Minutes
at 3rd Most Recent Fault
Fault 3 HHMM Displays the time when the third most recent fault occurred. No signal output
available
–
U3-30
(3014)
Date Year at 4th Most
Recent Fault
Fault 4 YYYY Displays the year when the fourth most recent fault occurred. No signal output
available
–
U3-31
(3015)
Date Month and Day at
4th Most Recent Fault
Fault 4 MMDD Displays the date and day when the fourth most recent fault
occurred.
No signal output
available
–
U3-32
(3016)
Time Hours and Minutes
at 4th Most Recent Fault
Fault 4 HHMM Displays the time when the fourth most recent fault occurred. No signal output
available
–
U3-33
(3017)
Date Year at 5th Most
Recent Fault
Fault 5 YYYY Displays the year when the fifth most recent fault occurred. No signal output
available
–
U3-34
(3018)
Date Month and Day at
5th Most Recent Fault
Fault 5 MMDD Displays the date and day when the fifth most recent fault
occurred.
No signal output
available
–
U3-35
(3019)
Time Hours and Minutes
at 5th Most Recent Fault
Fault 5 HHMM Displays the time when the fifth most recent fault occurred. No signal output
available
–
U3-36
(301A)
Date Year at 6th Most
Recent Fault
Fault 6 YYYY Displays the year when the sixth most recent fault occurred. No signal output
available
–
U3-37
(301B)
Date Month and Day a
6th Most Recent Fault
Fault 6 MMDD Displays the date and day when the sixth most recent fault
occurred.
No signal output
available
–
U3-38
(301C)
Time Hours and Minutes
at 6th Most Recent Fault Fault 6 HHMM
Displays the time when the most sixth recent fault occurred. No signal output
available
–
U3-39
(301D)
Date Year at 7th Most
Recent Fault
Fault 7 YYYY Displays the year when the most seventh recent fault occurred. No signal output
available
–
U3-40
(301E)
Date Month and Day at
7th Most Recent Fault
Fault 7 MMDD Displays the date and day when the seventh most recent fault
occurred.
No signal output
available
–
U3-41
(301F)
Time Hours and Minutes
at 7th Most Recent Fault
Fault 7 HHMM Displays the time when the seventh most recent fault occurred. No signal output
available
–
U3-42
(3020)
Date Year at 8th Most
Recent Fault
Fault 8 YYYY Displays the year when the eighth most recent fault occurred. No signal output
available
–
U3-43
(3021)
Date Month and Day 8th
at Most Recent Fault
Fault 8 MMDD Displays the date and day when the eighth most recent fault
occurred.
No signal output
available
–
U3-44
(3022)
Time Hours and Minutes
at 8th Most Recent Fault
Fault 8 HHMM Displays the time when the eighth most recent fault occurred. No signal output
available
–
U3-45
(3023)
Date Year at 9th Most
Recent Fault
Fault 9 YYYY Displays the year when the ninth most recent fault occurred. No signal output
available
–
U3-46
(3024)
Date Month and Day at
9th Most Recent Fault
Fault 9 MMDD Displays the date and day when the ninth most recent fault
occurred.
No signal output
available
–
U3-47
(3025)
Time Hours and Minutes
at 9th Most Recent Fault
Fault 9 HHMM Displays the time when the ninth most recent fault occurred. No signal output
available
–
U3-48
(3026)
Date Year at 10th Most
Recent Fault
Fault 10 YYYY Displays the year when the tenth most recent fault occurred. No signal output
available
–
U3-49
(3027)
Date Month and Day at
10th Most Recent Fault
Fault 10 MMDD Displays the date and day when the tenth most recent fault
occurred.
No signal output
available
–
U3-50
(3028)
Time Hours and Minutes
at 10th Most Recent
Fault 10 HHMM Displays the time when the tenth most recent fault occurred. No signal output
available
–
u U4: Maintenance Monitors
No.
(Addr.
Hex)
Name LCD Display Description
Analog
Output Level
Unit
U4-01
(004C)
Cumulative Operation
Time
Drv Elapsed Time
Displays the cumulative operation time of the drive. The value
for the cumulative operation time counter can be reset in
parameter o4-01. Use parameter o4-02 to determine if the
operation time should start as soon as the power is switched on
or only while the Run command is present. The maximum
number displayed is 99999, after which the value is reset to 0.
No signal output
available
1 h
U4-02
(0075)
Number of Run
Commands
RUN Cmd Counter
Displays the number of times the Run command is entered. Reset
the number of Run commands using parameter o4-13. This value
will reset to 0 and start counting again after reaching 65535.
No signal output
available
1 Time
B.14 U: Monitors
YASKAWA ELECTRIC TOEP C710636 10B Z1000U HVAC MATRIX Drive User Manual 313
B
Parameter List